29 specifications (characteristics) recommended soldering pattern external dimensions frequency temperature characteristics (unit: mm) internal connection (unit: mm) #4 #4 #3 #1 #2 #3 #1 0.7 9.6 (1.2) (1.2) 2.1 #2 4.0 3.5 0.5 3.7 max. 4.8 max. 11.7 max. 20.000m h51a e 1.8 1.91.7 1.9 1.8 7.8 series resistance crystal unit smd high-stability crystal unit ma-406h ? high-density mounting-type smd. ? excellent heat-resistance and environment capability. ? 9.6 mhz to 27.0 mhz available. item nominal frequency range temperature range drive level frequency tolerance (standard) frequency temperature characteristics load capacitance series resistance shunt capacitance insulation resistance aging shock resistance specifications 9.600 mhz to 27.000 mhz -55 ? to +125 ? -40 ? to +85 ? 2 mw max. 10 ? to 100 ? ?0 x 1 0 -6 as per below table 10 pf to as per below table 3.0 pf max. 500 m w min. ? x 1 0 -6 /year max. ? x 1 0 -6 max. symbol f t stg t opr gl dl d f/f c l r 1 c 0 ir fa s. r. remarks fundamental mode stored as bare product after unpacking only crystal oscillation is guaranteed ta=+25 c ? c ,dl=100 ? please specify operable temperature range, dl=100 ? ta=+25 c ? c , dl=100 ? three drops on a hard wooden board from 750 mm or excitation test with 29400 m/s 2 x 0.3 ms x 1/2 sine wave x 3 directions temperature range 0 ? to +50 ? -10 ? to +60 ? -20 ? to +70 ? -30 ? to +80 ? -40 ? to +85 ? frequency tolerance 3 x 10 -6 min. 5 x 10 -6 min. 7 x 10 -6 min. 10 x 10 -6 min. 15 x 10 -6 min. storage temperature operable temperature maximum drive level recommended drive level measured values for frequency tolerance and temperature characteristics need to be brought into mutual correlation prior to the start of production. metal may be exposed on the top of this product. this won't affect any quality, reliability or electrical spec. frequency (mhz) 9.6 f < 10.0 10.0 f < 12.0 12.0 f < 16.0 16.0 f 27.0 series resistance ( ) 50 max. 40 max. 30 max. 25 max. do not connect #2 and #3 external device. actual size
part numbering system high stability crystals ma-406h 16.0000 m a 2 - high stability x ? tal resonator ca-303hs: 3mm diameter metal can, 9.6~27mhz ma-406h: 4pin ? j ? lead smd 9.6~27mhz sa-315h: 1.5mm thin metal can, straight leads, 10.0~27mhz sa-315hz: 1.5mm thin smd metal can, z-form leads 10.0~27mhz frequency range: 4 decimal places min. 9.6000m~27.0000mhz m: in mhz freq . tolerance@25c s: +/-8ppm(optional) f: +/-10ppm load capacitance: a: 12.5pf aa: 27.0pf b: 16.0pf ab: 30.0pf c: 18.0pf ad: 50.0pf d: 22.0pf ae: 22.9pf f: series af: 35.0pf g: 20.0pf ag: 7.0pf h: 32.0pf ah: 40.0pf i: 33.0pf ai: 25.0pf j: 18.5pf ak: 10.5pf k: 10.0pf ap: 10.7pf l: 18.3pf m: 100.0pf n: 13.5pf p: 11.0pf q: 28.0pf r: 15.0pf t: 13.0pf u: 47.0pf v: 24.0pf w: 12.0pf y: 14.0pf z: 26.0pf tape & reel qty ma-406h only 0: 1000pcs per reel 2: 500pcs per reel 3: 250pcs per reel blank: bulk sa-315hz only 5: 3000pcs per reel f 03 s freq . temp char./op temp range available combinations 15 x: +/-15ppm/-40 to 85c 17x: +/-17ppm/-40 to 85c 20x: +/-20ppm/-40 to 85c 10w: +/-10ppm/-30 to 80c 12w: +/-12ppm/-30 to 80c 15w: +/-15ppm/-30 to 80c 07v: +/-7ppm/-20 to 70c 08v: +/-8ppm/-20 to 70c 10v: +/-10ppm/-20 to 70c 05u: +/-5ppm/-10 to 60c 06u: +/-6ppm/-10 to 60c 08u: +/-8ppm/-10 to 60c 03s: +/-3ppm/0 to 50c 04s: +/-4ppm/0 to 50c 05s: +/-5ppm/0 to 50c
|
